如何使用firewall、ufw、iptables的替代品nftables
本文最后更新于 1922 天前,其中的信息可能已经有所发展或是发生改变。

更改默认设置

# update-alternatives --set iptables /usr/sbin/iptables-nft
# update-alternatives --set ip6tables /usr/sbin/ip6tables-nft
# update-alternatives --set arptables /usr/sbin/arptables-nft
# update-alternatives --set ebtables /usr/sbin/ebtables-nft

清空当前规则集:

# nft flush ruleset

添加一个表:

# nft add table inet filter

添加input、forward和output三个基本链。input和forward的默认策略是drop。output的默认策略是accept。

# nft add chain inet filter input { type filter hook input priority 0 \; policy drop \; }
# nft add chain inet filter forward { type filter hook forward priority 0 \; policy drop \; }
# nft add chain inet filter output { type filter hook output priority 0 \; policy accept \; }

添加两个与TCP和UDP关联的常规链:

# nft add chain inet filter TCP
# nft add chain inet filter UDP

related和established的流量会accept:

# nft add rule inet filter input ct state related,established accept

loopback接口的流量会accept:

# nft add rule inet filter input iif lo accept

无效的流量会drop:

# nft add rule inet filter input ct state invalid drop

新的echo请求(ping)会accept:

# nft add rule inet filter input ip protocol icmp icmp type echo-request ct state new accept

新的UDP流量跳转到UDP链:

# nft add rule inet filter input ip protocol udp ct state new jump UDP

新的TCP流量跳转到TCP链:

# nft add rule inet filter input ip protocol tcp tcp flags \& \(fin\|syn\|rst\|ack\) == syn ct state new jump TCP

未由其他规则处理的所有通信会reject:

# nft add rule inet filter input ip protocol udp reject
# nft add rule inet filter input ip protocol tcp reject with tcp reset
# nft add rule inet filter input counter reject with icmp type prot-unreachable

此时,应决定对传入连接打开哪些端口,这些由TCP和UDP链处理。例如,要打开web服务器的连接端口,添加:

# nft add rule inet filter TCP tcp dport 80 accept

要打开web服务器HTTPS连接端口443:

# nft add rule inet filter TCP tcp dport 443 accept

允许SSH连接端口22:

# nft add rule inet filter TCP tcp dport 22 accept

允许传入DNS请求:

# nft add rule inet filter TCP tcp dport 53 accept
# nft add rule inet filter UDP udp dport 53 accept

确保更改是永久的(写入到文件)。

# nft list ruleset > /etc/nftables.conf

参考:https://wiki.archlinux.org/index.php/Nftables_(%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87)

上一篇
下一篇